login | register |

Line Striping Machine

Description ...

There are basically two types of striping machines. One uses air and it’s called a “conventional” machine. The other does not use air and it’s called…you guessed it…an “airless” machine. First, let’s take a look at the conventional. The major components of this type of machine are a 7 gallon paint pot that can be sealed shut, a small engine and a small air compressor. The air compressor feeds air to 4 places. The first place air is fed is into the sealed paint pot. This air pushes down on the paint and forces it out of the bottom through a hose to the paint gun. The second place air is fed is into the actual gun. This air turns the paint into a spray. If air weren’t introduced here it would come out of the gun like a squirt gun. The third place air is introduced is into a little can that holds one of two types of liquid: paint thinner if you’re spraying oil based paint or water if you’re spraying latex paint. This air forces the paint thinner or water through a hose right down to the tip of the gun. Why? To clean it out. This paint thinner or water completely bi-passes the paint line and goes directly to the tip of the gun. After lines are sprayed for a time the operator can open the small valve for 1 or 2 seconds, then close it. Paint thinner or water will go to the gun and clean it out. Now the operator can start painting again with a clean tip. The conventional (air) machine also has 2 hoses coming from the back of the machine; one for paint and one for air. This is the fourth place air can be fed. These lines feed a separate gun, kind of like the one you would use to paint a car. This gun is for stencils. If you want to use it, simply open a valve that directs the paint flow to that gun. Open another valve to direct the flow of air. Another important aspect of the conventional machine to consider is that these machines require 2 separate striping guns to accommodate 2 different types of paint. One gun is used for oil based paint, the other for latex .

Properties ...
    name properties
    numvalue floatvalue textvalue ntextvalue multi enabled
    Line Striping Machine name 0 0 1 0 0 1
    Line Striping Machine Brand 0 0 1 0 0 1
    Line Striping Machine Model 0 0 1 0 0 1
    color group 0 0 2 0 0 1
    frame color 0 0 1 0 1 1
    frame material 0 0 1 0 0 1
    Drive Power Source 0 0 2 0 0 1
    Pump Power Source 0 0 2 0 0 1
    Engine power 0 0 2 1 1 1
    Engine model 0 0 1 0 0 1
    Engine fuel type 0 0 1 0 0 1
    Fuel tank capacity 0 0 2 1 1 1
    Number of Batteries 1 0 0 0 0 1
    Battery size 0 0 2 0 0 1
    Battery Type 0 0 2 0 0 1
    Battery voltage (v) 0 1 0 0 0 1
    Charger type 0 0 1 0 0 1
    Charger voltage (v) 0 1 0 0 0 1
    Usage time (hr) 0 1 0 0 0 1
    Pump Type 0 0 2 0 0 1
    Pump Brand 0 0 1 0 0 1
    Airless Model 0 0 2 0 0 1
    Paint Tank/cans Capacity 0 0 2 1 1 1
    Number of cans 1 0 0 0 0 1
    Number of gun spray 1 0 0 0 0 1
    Paint Type 0 0 2 0 0 1
    Maximum Paint Output 0 0 2 1 1 1
    Maximum Fluid Flow 0 0 2 1 1 1
    Paint Outlet Filter 0 0 2 0 0 1
    Filter Area 0 0 2 1 1 1
    Inlet paint strainer 0 0 2 1 1 1
    Outlet paint strainer 0 0 2 1 1 1
    Hydraulic reservoir capacity 0 0 2 1 1 1
    Maximum hydraulic pressure 0 0 2 1 1 1
    Maximum Operating Pressure 0 0 2 1 1 1
    Maximum output pressure 0 0 2 1 1 1
    Common pressure 0 0 2 1 1 1
    Adjustable pressure 0 0 2 1 1 1
    Precise pressure control 0 0 2 1 1 1
    MWP 0 0 2 1 1 1
    Maximum Spraying Speed 0 0 1 0 0 1
    Maximum forward speed 0 0 2 1 1 1
    Maximum reverse speed 0 0 2 1 1 1
    Maximum line speed 0 0 2 1 1 1
    rated speed (rpm) 0 1 0 0 0 1
    Power Rating 0 0 1 0 0 1
    Electrical Capacity 0 0 1 0 0 1
    line type 0 0 2 0 0 1
    Line Width (mm) 0 0 1 0 0 1
    Line thickness (mm) 0 0 1 0 0 1
    Maximum Tip Size (inch) 0 0 1 0 1 1
    Nozzle standard configuration (inch) 0 1 0 0 0 1
    Maximum Nozzle Size (inch) 0 1 0 0 0 1
    High pressure pipe length 0 0 2 1 1 1
    pressure tube Diameter (mm) 0 1 0 0 0 1
    High pressure pipe resistance 0 0 2 1 1 1
    Pump inlet size 0 0 1 0 0 1
    Pump outlet size 0 0 1 0 0 1
    Heating Method 0 0 1 0 0 1
    Heating Temperature (°C) 0 0 1 0 0 1
    Roller diameter (mm) 0 1 0 0 0 1
    Sound Power 0 0 1 0 0 1
    Sound Pressure 0 0 1 0 0 1
    Controls 0 0 2 0 0 1
    display type 0 0 2 0 0 1
    display size (inch) 0 1 0 0 0 1
    Number of Tire/wheel 1 0 0 0 0 1
    Tire/wheel type 0 0 1 0 0 1
    front Tire/Wheel size (cm) 0 0 1 0 0 1
    rear Tire/Wheel size (cm) 0 0 1 0 0 1
    Maximum Hose Length 0 0 2 1 1 1
    lid size (cm) 0 1 0 0 0 1
    Handle Height (cm) 0 1 0 0 0 1
    Dimensions (cm) 0 0 1 0 0 1
    Weight (kg) 0 0 1 0 0 1
    Sprayable materials 0 0 1 0 1 1
    Usage 0 0 1 0 1 1
    Properties 0 0 2 0 0 1
    Features 0 0 2 0 0 1
    Packing includes 0 0 2 1 1 1
    after sales service 0 0 2 0 0 1
    guarantee period 0 0 2 1 1 1
    warranty period 0 0 2 1 1 1
    guarantee Conditions 0 0 1 0 1 1
    Certification 0 0 1 0 1 1
    descriptions 0 0 0 1 1 1
    thumbnail original 0 0 1 0 0 1
    Thumbnail 1 0 0 1 0 0 1
    Thumbnail 2 0 0 1 0 0 1
    Thumbnail 3 0 0 1 0 0 1
    subject 1
    Descriptions 1
Groups ...
  1. 1. city Beautification
Companies that have used this schema...